2
پژوهشکده مهندسی سازه، پژوهشگاه بینالمللی زلزله شناسی و مهندسی زلزله
3
دانشکده مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
چکیده
هدف اصلی این مطالعه بررسی تأثیر بار قائم بر رفتار جانبی قاب میانپر1 فولادی با مصالح بنایی به هنگام زلزله است. در این راستا یک مطالعه آزمایشگاهی که شامل دو نمونه قاب فولادی میانپر با مصالح بنایی تحت اثر بار جانبی و قائم میباشد، برای بررسی انتخاب شده است. نمونه اول تحت اثر بار جانبی و نمونه دوم تحت اثر بار جانبی و بار قائم قرار گرفته است. مدل اجزای محدود این دو نمونه آزمایشگاهی ساخته شده و بر اساس نتایج آزمایشگاهی صحتسنجی شدهاند. سپس مدل صحتسنجی شده برای انجام مطالعه پارامتریک استفاده شده است. نتایج نشاندهندهی آن است که حدوداً بیشتر از 60 درصد بار وارده بر میانقاب به دیوار میرسد و بقیه آن توسط تیر بالایی به ستونها منتقل میگردد. بر اساس نتایج، مقاومت جانبی نهایی و سختی قاب میانپر با افزایش بار قائم بر میانقاب تا 200 کیلونیوتن (که 128 کیلونیوتن آن معادل 7/6 درصد مقاومت فشاری آجرکاری به دیوار بنایی میرسد) بهترتیب 15 و 50 درصد افزایش پیدا میکنند. اما مقاومت جانبی بعد از افزایش بار قائم از 7/6 درصد به 2/10 درصد مقاومت فشاری آجرکاری کاهش مییابد. سختی نیز بعد از رسیدن بار قائم از 2/10 درصد به 7/13 درصد مقاومت فشاری آجرکاری تغییر چندانی پیدا نمیکند. میتوان گفت که بار قائم تا مقدار مشخصی باعث افزایش سختی و مقاومت جانبی میانقاب خواهد شد و بعد از آن مقدار سختی تقریباً ثابت باقی میماند و مقاومت جانبی نهایی کاهش پیدا میکند.
Elghazouli, A.Y. (2016) Seismic Design of Buildings to Eurocode 8. CRC Press.
Fardis, M.N. (2000) Design provisions for masonry-infilled RC frames. Proceedings of 12th World Conference on Earthquake Engineering.
Benjamin, J.R., Williams, H.A. (1958) The Behavior of One-Story Brick Shear Walls. ASCE, p.30.
Wood, R.H. (1958) The stability of tall buildings. ICE Proceedings, Thomas Telford.
Liu, Y. and Soon, S. (2012) Experimental study of concrete masonry infills bounded by steel frames. Canadian Journal of Civil Engineering, 39(2), 180-190.
Mainstone, R.J. and Weeks, G. (1972) The Influence of a Bounding Frame on the Racking Stiffness and Strengths of Brick Walls. Building Research Station.
Mehrabi, A.B., Shing, P.B., Schuller, M.P. and Noland, J.L. (1996) Experimental evaluation of masonry-infilled RC frames. Journal of Structural Engineering, 122, 228-237.
Polliakov, S.V.E. (1963) Masonry in Framed Buildings: An Investigation into the Strength and Stiffness of Masonry Infilling. National Lending Library for Science and Technology.
Holmes, M. (1961) Steel frames with brickwork and concrete infilling. ICE Proceedings, Thomas Telford.
Chrysostomou, C., Gergely, P. and Abel, J. (2002) A six-strut model for nonlinear dynamic analysis of steel infilled frames. International Journal of Structural Stability and Dynamics, 2(03), 335-353.
Crisafulli, F.J. and Carr, A.J. (2007) Proposed macro-model for the analysis of infilled frame structures. Bulletin of the New Zealand Society for Earthquake Engineering, 40(2), 69-77.
Madan, A., Reinhorn, A., Mander, J. and Valles, R. (1997) Modeling of masonry infill panels for structural analysis. Journal of Structural Engineering, 123, 1295-1302.
Barua, H. and Mallick, S. (1977) Behaviour of mortar infilled steel frames under lateral load. Building and Environment, 12(4), 263-272.
Smith, B.S. and Carter, C. (1969) A method of analysis for infilled frames. ICE Proceedings, Thomas Telford.
Choudhury, T., Milani, G. and Kaushik, H.B. (2015) Comprehensive numerical approaches for the design and safety assessment of masonry buildings retrofitted with steel bands in developing countries: The case of India. Construction and Building Materials, 85, 227-246.
Lafuente, M., Molina, A. and Genatios, C. (2000) Seismic resistant behavior of minor reinforced concrete frames with masonry infill walls. 12WCEE.
Liu, Y. and Manesh, P. (2013) Concrete masonry infilled steel frames subjected to combined in-plane lateral and axial loadingâAn experimental study. Engineering Structures, 52, 331-339.
Mohammadi, M. (2014) On The Influence of Bay Number, Vertical Load and Connection Rigidity of the Frame on the Behavior of Masonry Infilled Frames. Technical report No. 7386, International Institute of Earthquake Engineering and Seismology (in Persian).
Hibbit, H., Karlsson, B. and Sorensen, E. (2012) ABAQUS User Manual, Version 6.12. Simulia, Providence, RI. 2012.
Committee, A.S.S.R.S. (2007) Seismic Rehabilitation of Existing Buildings, ASCE/SEI 41-06). American Society of Civil Engineers, Reston, VA, USA.
Mohyeddin, A., Goldsworthy, H.M. and Gad, E.F. (2013) FE modelling of RC frames with masonry infill panels under in-plane and out-of-plane loading. Engineering Structures, 51, 73-87.
Lourenco, P.B. (1996) Computational Strategies for Masonry Structures. TU Delft, Delft University of Technology.
Aref, A.J. and Dolatshahi, K.M. (2013) A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures. Computers & Structures, 120, 9-23.
Kumar, N., Amirtham, R. and Pandey, M. (2014) Plasticity based approach for failure modelling of unreinforced masonry. Engineering Structures, 80, 40-52.
Moghaddam, H. and Goudarzi, N. (2010) Transverse resistance of masonry infills. ACI Structural Journal, 107(4), 461.
Minaie, E., Moon, F.L. and Hamid, A.A. (2014) Nonlinear finite element modeling of reinforced masonry shear walls for bidirectional loading response. Finite Elements in Analysis and Design, 84, 44-53.
Moradabadi, E., Laefer, D.F., Clarke, J.A. and Lourenço, P.B. (2015) A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms. Construction and Building Materials, 77, 489-500.
Page, A. (1981) The biaxial compressive strength of brick masonry. ICE Proceedings, Thomas Telford.
Agnihotri, P., Singhal, V. and Rai, D.C. (2013) Effect of in-plane damage on out-of-plane strength of unreinforced masonry walls. Engineering Structures, 57, 1-11.
Pereira, J.M., Campos, J. and Lourenço, P.B. (2015) Masonry infill walls under blast loading using confined underwater blast wave generators (WBWG). Engineering Structures, 92, 69-83.
Krätzig, W.B. and Pölling, R. (2004) An elasto-plastic damage model for reinforced concrete with minimum number of material parameters. Computers & Structures, 82(15), 1201-1215.
Kaushik, H.B., Rai, D.C. and Jain, S.K. (2007) Stress-strain characteristics of clay brick masonry under uniaxial compression. Journal of materials in Civil Engineering, 19(9), 728-739.
Dhanasekar, M. and Haider, W. (2008) Explicit finite element analysis of lightly reinforced masonry shear walls. Computers & Structures, 86(1), 15-26.
فرجی نجارکلائی, کاوه, محمدی, مجید, & فنائی, نادر. (1397). بررسی رفتار جانبی قاب میانپر تحت اثر بار قائم. فصلنامه علوم و مهندسی زلزله, 5(2), 119-132.
MLA
کاوه فرجی نجارکلائی; مجید محمدی; نادر فنائی. "بررسی رفتار جانبی قاب میانپر تحت اثر بار قائم". فصلنامه علوم و مهندسی زلزله, 5, 2, 1397, 119-132.
HARVARD
فرجی نجارکلائی, کاوه, محمدی, مجید, فنائی, نادر. (1397). 'بررسی رفتار جانبی قاب میانپر تحت اثر بار قائم', فصلنامه علوم و مهندسی زلزله, 5(2), pp. 119-132.
VANCOUVER
فرجی نجارکلائی, کاوه, محمدی, مجید, فنائی, نادر. بررسی رفتار جانبی قاب میانپر تحت اثر بار قائم. فصلنامه علوم و مهندسی زلزله, 1397; 5(2): 119-132.