Abedi Sarvestani, H. (2018). Structural evaluation of steel self-centering moment-resisting frames under far-field and near-field earthquakes. J. Constr. Steel Res., 151, 83–93. doi:10.1016/j.jcsr.2018.09.013
Abedi Sarvestani, H. (2019). Parametric study of hexagonal castellated beams in post-tensioned self-centering steel connections. Frontiers of Structural and Civil Engineering, 13(5), 1020-1035, doi:10.1007/ s11709-019-0534-6
Asadolahi, S.M., & Fanaie, N. (2020). Performance of self-centering steel moment frame considering stress relaxation in prestressed cables. Advances in Structural Engineering, 23(9), 1813-1822. doi:10.1177/ 1369433219900940
ATC. (2009). Quantification of Building Seismic Performance Factors. US Department of Homeland Security. FEMA.
Bavandi, M., Moghadam, A.S., Mansoori, M.R., & Aziminejad, A. (2021). Introducing a new seismic efficiency index of post-tensioned self-centering steel moment connections. Structures, 33, 463–483.
Bavandi, M., Moghadam, A. S., Mansoori, M. R., & Aziminejad, A. (2022). Computation of the repairability index of short buildings with rocking connections. Proceedings of the Institution of Civil Engineers-Forensic Engineering, 175, 7-20.
Broujerdian, V., & Mohammadi Dehcheshmeh, E. (2022). Locating the rocking section in self-centering bi-rocking walls to achieve the best seismic performance. Bulletin of Earthquake Engineering, 20(5), 2441-2468.
Chou, C.C., & Lai, Y.J. (2009). Post-tensioned self-centering moment connections with beam bottom flange energy dissipators. J. Constr. Steel Res., 65(10-11), 1931–1941. doi:10.1016/j.jcsr.2009.06.002
Dehcheshmeh, E.M., & Broujerdian, V. (2022). Determination of optimal behavior of self-centering multiple-rocking walls subjected to far-field and near-field ground motions. Journal of Building Engineering, 45, 103509.
Dimopoulos, A., Karavasilis, T.L., Vasdravellis, G., & B.U. (2013). Seismic design, modeling and assessment of self-centering steel frames using post-tensioned connections with web hourglass shape pins. Bulletin of Earthquake Engineering, 11(5), 1797-1816. doi:10. 1007/s10518-013-9437-4
Dimopoulos, C.A., Freddi, F., Karavasilis, T.L., & Vasdravellis, G. (2020). Progressive collapse resistance of steel self-centering MRFs including the effects of the composite floor. Engineering Structures, 208, 109923.
Dobossy, M., Garlock, M., & VanMarcke, E. (2006). Comparison of two self-centering steel moment frame modeling techniques: explicit gap models, and non-linear rotational spring models. Proceedings of the 4th International Conference on Earthquake Engineering. Taipei, Taiwan.
Dowden, D.M. (2016). Full-Scale Pseudodynamic Testing of Self-Centering Steel Plate Shear Walls. Journal of Structural Engineering (United States), 142(1). doi:10.1061/(ASCE)ST.1943-541X.0001367
Ebrahimi Majumerd, M.J., Mohammadi Dehcheshmeh, E., & Broujerdian, V. (2022). Feasibility study of using endurance time method for seismic evaluation of self-centering buckling restrained braced frame (SC-BRC-BF). Modares Civil Engineering Journal, 22.
Fanaie, N., Faegh, S., & Partovi, F. (2019). An improved and innovative formulation for calculating amplified elastic story drift induced by RBS connections in steel moment frames. J. Constr. Steel. Res., 160, 510-527. doi:10.1016/j.jcsr.2019.06.003
Garlock, M.M., Ricles, J.M., & Sause, R. (2005). Experimental studies of full-scale post-tensioned steel connections. Journal of Structural Engineering, 131(3), 438-448.
Garlock, M.M., Sause, R., & Ricles, J.M. (2007). Behavior and design of posttensioned steel frame systems. Journal of Structural Engineering, 133(3), 389-399.
Guan, X., Burton, H., & Moradi, S. (2018). Seismic performance of a self-centering steel moment frame building: From component-level modeling to economic loss assessment. J. Constr. Steel Res., 150, 129-140. doi:10.1016/j.jcsr.2018.07.026
Guan, X., Burton, H., & Shokrabadi, M. (2021). A database of seismic designs, nonlinear models, and seismic responses for steel moment-resisting frame buildings. Earthquake Spectra, 37(2), 1199-1222.
Herning, G., Garlock, M. E., & Vanmarcke, E. (2011). Reliability-based evaluation of design and performance of steel self-centering moment frames. J. Constr. Steel Res., 67(10), 1495-1505. doi:10.1016/j.jcsr.2011.03. 023.
Huang, X., Zhou, Z., Eatherton, M. R., Zhu, D., & Guo, C. (2020). Experimental Investigation of Self-Centering Beams for Moment-Resisting Frames. Journal of Structural Engineering (United States), 146(3), 1-15. doi:10.1061/(ASCE)ST.1943-54.
Ibarra, L.F., & Krawinkler, H. (2005). Global Collapse of Frame Structures under Seismic Excitations (PEER Report 2005/06). University of California at Berkeley. California: Pacific Earthquake Engineering Research Center.
Ibarra, L.F., Medina, R.A., & Krawinkler, H. (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthq. Eng. Struct. Dyn., 34(12), 1489-1511.
Kircher, C. et al. (2010). Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors.
Krawinkler, H. (1978). Shear in beam-column joints in seismic design of steel frames. Engineering Journal, 15(3).
Majumerd, M.J., Mohammadi Dehcheshmeh, E., Broujerdian, V., & Moradi, S. (2022). Self-centering rocking dual-core braced frames with buckling-restrained fuses. J. Constr. Steel Res., 194.
Mirzaie Aliabadi, M., Bahaari, M.R., & Torabian, S. (2013). Design and analytical evaluation of a new self-centering connection with bolted T-stub devices. Advances in Materials Science and Engineering.
Mohammadi Dehcheshmeh, E., & Broujerdian, V. (2022). Probabilistic evaluation of self-centering birocking walls subjected to far-field and near-field ground motions. Journal of Structural Engineering, 148(9), 4022134.
Moradi, S., & Alam, M.S. (2017). Lateral load-drift response and limit states of posttensioned steel beam-column connections: parametric study. Journal of Structural Engineering (United States), 143(7), 1-13. doi:10.1061/(ASCE)ST.1943-5.
Moradi, S., & Alam, M.S. (2017). Multi-criteria optimization of lateral load-drift response of posttensioned steel beam-column connections. Engineering Structures, 130, 180-197. doi:10.1016/j. engstruct.2016.10.005.
Pantousa, D., & Karavasilis, T.L. (2020). Numerical assessment of the fire behavior of steel posttensioned moment-resisting frames. Journal of Structural Engineering (United States), 146(4), 1-18. doi:10.1061/ (ASCE)ST.1943-541X.0002581.
Pieroni, L., di Benedetto, S., Freddi, F., & Latour, M. (2022). Genetic Algorithm for the optimal placement of Self-Centering Damage-Free joints in steel MRFs. J. Constr. Steel Res., 197, 107489.
Qin, Y., Shu, G.P., & Wang, W. (2020). Seismic behavior of self-centering steel connections with friction T-stubs. J. Constr. Steel Res., 173, 106263. doi:10.1016/j.jcsr.2020.106263.
Ricles, J., Sause, R., Garlock, M., & Zhao, C. (2001). Post-tensioned seismic-resistant connections for steel frames. Journal of Structural Engineering, 127(2), 113-121.
Shariati, M.M., Ghorbani, M., Naghipour, N., Alinejad, & Toghroli, A. (n.d.). The effect of RBS connection on energy absorption in tall buildings with braced tube frame system. Steel and Composite Structures, an International Journal, 34(3), 393.