Abrahamson, N. (1998). Seismological aspects of near-fault ground motions. Proceedings of the 5th Caltrans Seismic Research Workshop. Sacramento, CA, United States of America: California Department of Transportation Engineering Service Center.
ACI (2019). ACI 318-19 Building Code requirements for structural concrete and commentary. American Concrete Institute eBooks. Farmington Hills, MI, United States of America: American Concrete International. https://doi.org/10.14359/51716937.
ASCE (2016). Minimum design loads for buildings and other structures: ASCE-SEI 7-16. American Society of Civil Engineers eBooks. Author. https://doi.org/ 10.1061/ 9780784412916.
ATC (2009). Quantification of Building Seismic Performance Factors: FEMA P69. APPLIED TECHNOLOGY COUNCIL.
Baker, J.W. (2007). Quantitative classification of near-fault ground motions using wavelet analysis. Bulletin of the Seismological Society of America, 97(5), 1486-1501. https://doi.org/10.1785/0120060255.
Baker, J. W., & Cornell, C. A. (2008). Vector-valued intensity measures for pulse-like near-fault ground motions. Engineering Structures, 30(4), 1048-1057. https://doi.org/10.1016/j.engstruct.2007.07.009.
Baltzopoulos, G. (2015). Structural Performance Evaluation in Near-Source Conditions (Ph.D. Dissertation). Università degli Studi di Napoli Federico II.
Baltzopoulos, G., Baraschino, R., Iervolino, I., & Vamvatsikos, D. (2017). SPO2FRAG: software for seismic fragility assessment based on static pushover. Bulletin of Earthquake Engineering, 15(10), 4399-4425. https://doi.org/10.1007/s10518-017-0145-3.
Baltzopoulos, G., & Vamvatsikos, D. (2016). Analytical modelling of near-source pulse-like seismic demand for multi-linear backbone oscillators. Earthquake Engineering & Structural Dynamics, 45(11), 1797-1815. https://doi.org/10.1002/eqe.2729.
BHRC (2015). Iranian Code of Practice for Seismic Resistant Design of Buildings : Standard No. 2800 (4th Edition). Building and Housing Research Center.
Champion, C.P., & Liel, A.B. (2012). The effect of near‐fault directivity on building seismic collapse risk. Earthquake Engineering & Structural Dynamics, 41(10), 1391-1409. https://doi.org/10.1002/eqe.1188.
Cox, K., & Ashford, S.A. (2002). Characterization of Large Velocity Pulses for Laboratory Testing. Retrieved from https://peer.berkeley.edu/publications/ peer_reports/reports_2002/0222.pdf.
De Luca, F., Vamvatsikos, D., & Iervolino, I. (2012). Near-optimal piecewise linear fits of static pushover capacity curves for equivalent SDOF analysis. Earthquake Engineering & Structural Dynamics, 42(4), 523-543. https://doi.org/10.1002/eqe.2225.
Eads, L., Miranda, E., Krawinkler, H., & Lignos, D. G. (2012). An efficient method for estimating the collapse risk of structures in seismic regions. Earthquake Engineering & Structural Dynamics, 42(1), 25-41. https://doi.org/10.1002/eqe.2191.
Ellingwood, B.R., & Wen, Y.K. (2005). Risk-benefit-based design decisions for low-probability/high consequence earthquake events in Mid-America. Progress in Structural Engineering and Materials, 7(2), 56-70. https://doi.org/10.1002/pse.191.
Haselton, C.B., Liel, A.B., Deierlein, G.G., Dean, B.S., & Chou, J.H. (2011). Seismic collapse Safety of reinforced concrete buildings. I: Assessment of ductile moment frames. Journal of Structural Engineering-Asce, 137(4), 481-491. https://doi.org/10.1061/(asce)st. 1943-541x.0000318.
Judd, J.P., & Charney, F.A. (2014). Earthquake risk analysis of structures. Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal.
Kohrangi, M., Bazzurro, P., & Vamvatsikos, D. (2021a). Seismic risk and loss estimation for the building stock in Isfahan. Part I: exposure and vulnerability. Bulletin of Earthquake Engineering, 19(4), 1709-1737. https://doi.org/10.1007/s10518-020-01036-2.
Kohrangi, M., Bazzurro, P., & Vamvatsikos, D. (2021b). Seismic risk and loss estimation for the building stock in Isfahan: part II—hazard analysis and risk assessment. Bulletin of Earthquake Engineering, 19(4), 1739-1763. https://doi.org/10.1007/s10518-020-01037-1.
Lazar, N., & Dolšek, M. (2014). A closed form solution for seismic risk assessment incorporating intensity bounds. Engineering Structures, 78, 78-89. https:// doi.org/10.1016/j.engstruct.2014.07.011.
Liel, A.B., Haselton, C.B., & Deierlein, G.G. (2011). Seismic Collapse Safety of reinforced concrete buildings. II: Comparative assessment of nonductile and ductile moment frames. Journal of Structural Engineering-asce, 137(4), 492-502. https://doi.org/ 10.1061/(asce)st.1943-541x.0000275.
Liel, A.B., Luco, N., Raghunandan, M., & Champion, C.P. (2015). Modifications to risk-targeted seismic design maps for subduction and near-fault hazards. International Conference on Applications of Statistics and Probability in Civil Engineering. https://doi.org/ 10.14288/1.0076228.
Luco, N., Ellingwood, B.R., Hamburger, R.O., Hooper, J., Kimball, J., & Kircher, C.A. (2007). Risk-Targeted versus Current Seismic Design Maps for the Conterminous United States. SEAOC 2007 Convention Proceedings. Retrieved from http://geohazards.usgs. gov/ designmaps/us/inc/SEAOCConventionRevs.pdf.
Shahi, S.K., & Baker, J.W. (2014). An efficient algorithm to identify strong velocity pulses in multi-component ground motions. Bulletin of the Seismological Society of America, 104(5), 2456-2466.
Somerville, P., Smith, N.F., Graves, R., & Abrahamson, N.A. (1997). Modification of empirical strong ground motion attenuation relations to include the amplitude and duration effects of rupture directivity. Seismological Research Letters, 68(1), 199-222. https://doi.org/10.1785/gssrl.68.1.199.
Tehranizadeh, M., & Shanehsazzadeh, H. (2012). Directivity effect on near-fault amplification factor. Iran-US Joint Seismic Workshop.
Tehranizadeh, M., & Shanehsazzadeh, H. (2013). Near-fault amplification factor by using wavelet method. Research, Development and Practice in Structural Engineering and Construction.
Uniformly distributed random numbers - MATLAB rand. (n.d.). Retrieved from https://www.mathworks. com/help/matlab/ref/rand.html.
Vamvatsikos, D. (2002). Seismic Performance, Capacity and Reliability of Structures as Seen Through Incremental Dynamic Analysis. Retrieved from http://mortezarazi.persiangig.com/document/codes/IDA%20BOOK%20BY%20CORNELL.pdf.
Vamvatsikos, D., & Cornell, C. (2002). The incremental dynamic analysis and its application to performance-based earthquake engineering. Proceedings of the 12th European Conference on Earthquake Engineering. Retrieved from http://ci. nii.ac.jp/naid/10020952556.
Vamvatsikos, D., & Cornell, C.A. (2006). Direct estimation of the seismic demand and capacity of oscillators with multi-linear static pushovers through IDA. Earthquake Engineering & Structural Dynamics, 35(9), 1097-1117. https://doi.org/10.1002/eqe.573.
Vice Presidency for Strategic Planning and Supervision (2014). Instruction for Seismic Rehabilitation of Existing Buildings: Publication No 360 (First Edition). Tehran, Iran (Islamic Republic of): Office of Deputy for Strategic Supervision, Department of Technical Affairs.
Yousefi, M., & Taghikhany, T. (2014). Incorporation of directivity effect in probabilistic seismic hazard analysis and disaggregation of Tabriz city. Natural Hazards, 73(2), 277-301. https://doi.org/10.1007/ s11069-014-1096-5.